Apache Technologies Bullseye 3 Manuel de l'opérateur télécharger pdf (Page 11)

18 19

Speciﬁcations

Beam Reception 360 degrees

Operating Range Over 1500 ft. (460 m) radius, laser dependent

Laser RPM Minimum - 105 ; Maximum - 1200

Vertical Reception 6.75" (171 mm)

Accuracy

Center On-Grade Fine: 3/16" (5 mm)

(Grading) Standard: 3/8" (10 mm)

Wide: 3/4" (20 mm)

Offset On-Grade Fine: 1/2" (12 mm)

(Excavation) Standard: 1.0" (25 mm)

Wide: 2.0" (50 mm)

Blade Tilt Accuracy ± 0.5°, ± 1.5°, ± 2.5°

Plumb Swing Accuracy ± 0.5°, ± 1.5°, ± 2.5°

Display Output Bright or Dim

Power Options Alkaline - 4 x "C" Cell - Standard

Nickel Metal Hydride - 4 x "C" Cell

Power Cable - 10-30 VDC

Battery Life - Alkaline 60 Hours, Display Dim

(Continuous in beam) 45 Hours, Display Bright

Battery Life - Ni-MH 45 Hours, Display Dim

(Continuous in beam) 30 Hours, Display Bright

Battery Recharge Time 3 - 4 hours

Automatic Shut Off 75 minutes with no laser beam

Out of Beam Indication High and Low, Selectable on or off

Remote Display Option Yes

Automatic Control Option Yes

Dimensions 13.50" x 5.58" x 5.88" (LxWxD)

(343 x 142 x 149 mm)

Mounting Pipe 1.66" to 2.00" O.D. round tube

(42 mm to 50 mm) and

1 1/2" (38 mm) square tube

Operating Temperature -4° F to 140° F (-20° to +60° C)

Warranty

Apache Technologies receivers are warranted to be free of defects in material

and workmanship for a period of two years. This warranty period is twenty-four

months from the date the product is delivered from the dealer to the purchaser

or is put into service as a demonstration or rental unit.

Please return the included warranty card as this will expedite any warranty

service that may be required. Please retain your warranty information and proof

of purchase. If a warranty card is not on ﬁle, proof of purchase must accompany

your request for warranty repair.

Any evidence of abuse, misuse, alteration, accident or negligent use or an

attempt to repair products by unauthorized personnel or with parts other than

those provided by Apache Technologies automatically voids the warranty.

The user of the product is expected to follow all operating instructions, periodically

checking the instrument and the work as it progresses.

Apache Technologies liability under this warranty is limited to repairing or

replacing any product returned to an authorized service center for that purpose.

The foregoing states the entire liability of Apache Technologies regarding the

purchase and use of its product and they shall not be held responsible for any

consequential loss or damage of any kind.

This warranty is in lieu of all other warranties, expressed or implied, and constitutes

all of Apache Technologies liability with respect to merchandise sold by it.

Maintenance and Care

Your BULLSEYE Laser Receiver was shipped in a moisture resistant foam

padded carrying case. If the unit is transported from job to job inside its

factory-provided case and normal instrument precautions are followed, the unit

will provide many years of service.

Do not wipe dust or dirt off the laser receiver with a dry cloth as scratching

could occur, possibly damaging these surfaces. Use only a good quality glass

cleaner with a soft cloth on all external window surfaces. If these surfaces have

hardened concrete or other materials on them, take the unit to your Authorized

Service Center for cleaning.

If the system will not be used for a 30 day period or more, it is recommended

to remove the batteries from the receiver. Space is provided in the carrying

case for the storage of batteries.

1 2 ... 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Apache Technologies Bullseye 3 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur Apache Technologies Bullseye 3